EffectShader

An effect shader is a visual effect typically used for spells, enchantments, or other magic effects. In some cases, effect shaders are applied to variant creatures to make them look somewhat different than their relatives.

The shader can consist of two components, a Membrane Shader and a Particle Shader.

Membrane Shader

The Membrane Shader is applied directly to the mesh of a target object. How the shader interacts with the mesh's base texture is determined in large part by the Source and Dest Blend Modes.

Ignore Base Geometry Texture Alpha

Check this box to ?

Affect Skin Only

Check this box to make the Membrane Shader only affect NPC's exposed skin and not any apparel that is being worn. E.g. the effectSunDamage shader uses this.

Source and Dest Blend Mode

Select the functions for the source and destination pixels here.

Zero

Uses 0 as its pixel value. (All channels of the color are multiplied by zero)

One

Uses 1 as its pixel value. (Multiplies each component by one)

Source Alpha

RGB components of source pixel multiplied by alpha. (Multiplies all channels with the source alpha)

Source Inverted Alpha

RGB components of source pixel multiplied by 1 - alpha. (Multiplies all channels with one minus the source alpha)

Source Color

Color of source pixel. (Multiplies each component with the respective component in the source color)

Source Inverse Color

Color of source pixel subtracted per component from white. (Multiplies each component with one minus the respective component in the source color)

Dest Alpha

RGB components of destination pixel multiplied by alpha. (Multiplies all channels with the destination alpha)

Dest Inverted Alpha

RGB components of destination pixel multiplied by 1 - alpha. (Multiplies all channels with one minus the destination alpha)

Dest Color

Color of destination pixel. (Multiplies each component with the respective component in the destination color)

Dest Inverse Color

Color of destination pixel subtracted per component from white. (Multiplies each component with one minus the respective component in the destination color)

Source Alpha SAT

Takes the lesser of the source pixel's alpha or one minus the destination pixel's alpha and places it in the red, green, and blue fields of the specified pixel. This mode sets the specified pixel's alpha to be 1. (The red, green and blue channel are multiplied with the min(alpha_source, 1 - alpha_destination), alpha is multiplied by one. This can only be used for Source and will override the value set in Destination.)

Blend Operation

This section determines how the source and destination functions are combined. Options are as follows:

Add - (Result = Source + Destination) (This blend mode simply adds pixel values of one layer with the other. In case of values above 1 (in the case of RGB), white is displayed.)

Subtract - (Result = Source - Destination) (This blend mode simply subtracts pixel values of one layer with the other. In case of negative values, black is displayed.)

Reverse Subtract - (Result = Destination - Source) (Difference subtracts the top layer from the bottom layer or the other way round, to always get a positive value. Blending with black produces no change, as values for all colors are 0. (The RGB value for black is 0,0,0). Blending with white inverts the picture.)

Minimum - (Result = MIN(Source, Destination)) (Creates a resultant pixel that retains the smallest components of the foreground and background pixels.)

Maximum - (Result = MAX(Source, Destination)) (Selects the maximum of each component from the foreground and background pixels.)

The default setting should work for most shaders, as it resembles typical alpha blending.

• Source Blend Mode: Source Alpha
• Dest Blend Mode: Source Inverted Alpha
• Blend Operation: Add

To make something brighter, try these options;

• Source Blend Mode: One
• Dest Blend Mode: One
• Blend Operation: Add

For modulation (i.e. multiplying over the existing texture) try this;

• Source Blend Mode: Dest Color
• Dest Blend Mode: Zero
• Blend Operation: Add

Z Test Function

This value defaults to Equal To. The "Greater Than" and "Greater Than or Equal To" values are supposed to change the depth of the shader effects, allowing it to show through walls; however, this behavior is broken in Skyrim.

(The z-buffer, or depth buffer, is used to ensure that objects are displayed according to their depth. During rendering of a triangle, the Z-value of a given pixel is compared to the value stored in the Z-Buffer. Based on the Z-testing function, the triangle either is allowed to overdraw the pixel or not. The default behavior is to accept pixel that have a Z-value that is smaller or the same as the value in the Z-Buffer, making objects closer to the camera occlude objects which are farther away.)

Fill / Texture Effect

Determines the properties of the fill color or texture. All time values in this frame are in seconds.

Alpha Fade In Time

The time the fill effect takes to reach its Full Alpha Ratio value.

Full Alpha Time

The duration the fill effect stays at the Full Alpha Ratio.

Alpha Fade Out Time

The time the fill effect takes to reach its Persistent Alpha Ratio.

Full Alpha Ratio

The alpha amount of the fill effect. A value of 1 would be completely opaque.

Persistent Alpha Ratio

The alpha amount of the persistent fill effect. The persistent effect will last for as long as the effect shader is active. For a persistent effect to be visible, the FX Persist flag should be checked on in the Magic Effects window.

Alpha Pulse Amplitude

How noticeable the pulsation of the shader is; a multiplier applied to the Full or Persistent Alpha Ratio. Relevant only when one of the blend modes has been set to Source (inverted) Alpha.

Alpha Pulse Frequency

How often the shader exhibits a pulse. It may be easier to consider that the period of any given pulse would be 1 second divided by the frequency of the pulses (i.e. larger values give shorter pulses, decimal values below 1 give longer pulses).

Texture Animation Speed (U, V)

If a texture is selected, it can be animated across the U (horizontal) and V (vertical) texture coordinates using these speed values. Make the value negative to get movement in the opposite direction.

Texture Scale (U, V)

A larger value will repeat the texture more frequently on the surface of the target object.

Here's an explanation of the alpha/opacity values for those who find prose easier to understand: When a shader is first applied, it immediately uses Full Alpha Ratio as its opacity for Full Alpha Time; after that, the shader fades in from Full Alpha Ratio to Persistent Alpha Ratio over Alpha Fade Out Time. Over the course of the shader's lifetime (including during fades), the opacity will vary by up to Alpha Pulse Ratio (multiplied by the Full or Persistent Alpha Ratio) at a rate of Alpha Pulse Frequency times per second. When the shader is removed from a reference, it will always fade out from its current opacity to zero over Alpha Fade Out Time. The fade-in behavior changes if the Persistent Alpha Ratio is greater than the Full Alpha Ratio: in this case, the shader will instantly switch from Full Alpha Ratio to Persistent Alpha Ratio at the end of the Full Alpha Time. This is implied by the names of the settings -- "full," as in "maximum," alpha ratio -- but it's still not necessarily what one might expect, and it's definitely the less useful behavior.

Fill Texture

Press the Edit button to add a texture instead of using a solid color. To remove an image file, press this button and cancel the dialogue window that appears.

Palette Texture

Press the Edit button to define a palette texture. The exact function of this texture is unknown, but if one isn't defined, your shader may not work.

Ignore Alpha

Check this box to ?

Projected UVs

Textures appear to be projected behind the membrane instead of sticking the textures onto the membrane.

Lighting

?

No Wpns

Checking this box makes it so the effects are not applied to weapons.

Grayscale To Palette - Color

Uses the colors from the Palette Texture.

Grayscale To Palette - Alpha

Texture alpha is ignored when this is off (Palette opaque).

Color Key 1-3

Only the level of white / black seems relevant when a texture has been selected. The color keys are ignored (true for all blend modes?) when no texture is selected. The scale represents intensity/brightness or in some cases the size/thickness of the effect. Time is given in seconds since the shader started.

Edge Effect

Applies a light rim of sorts to the outer edge of the mesh. Refer to the Fill / Texture Effect section for the majority of the settings. The pulsation settings in these two sections are independent of each other making it possible to create a shader that pulsates between the (animated) texture membrane and a (pulsating) edge effect.

Fall Off

This value represents the bias of the rim lighting. Higher values will cause the rim effect to fall off quicker, giving it a sharper outline. A value below one makes the edge (texture) more visible and it will appear "solid" if this value is set to 0.

Inverse

Check this box to make the edge effect's blend mode inverted relative to the fill effect. For example, when using additive fill effect, checking this box will cause the edge effect to darken rather than lighten the mesh.

Color

The color of the edge effect.

Holes

Holes are used to define a dissolve for the object the Effect Shader is on. These were used in Skyrim for when Actors dissolve when killed with Lightning. This is done by animating the alpha cut off on a grayscale image. This is often used in conjunction with a Fill/Texture Effect.

texture input box

Select a .dds file to be used for this effect

Alpha Test Animation

Start Time

How long after applying the Effect Shader should the dissolve start.

End Time

How long after applying the Effect Shader should the dissolve end.

Start Val

The black value that is cut off at the start.

End Val

The black value that is cut off at the end.

Particle Shader

Use the Particle Shader section to create particles that will emit from the target object. These effects are limited to ObjectReferences that are also Actors; trying to emit particles from a piece of armor or another inanimate object will prove fruitless.

The method of particle alpha blending is determined by the Source and Dest Blend Modes. Refer to the Membrane Shader section.

Particle Shader Parameters

Z Test Function	Default is Normal. When set to Always Show, the particles will draw on top of all other meshes, making particles visible through walls. The Detect Life shader uses this effect.
Particle Birth Ramp Up Time	The time for the particle to reach its Full Particle Birth Ratio
Full Particle Birth Time	The duration that particles emit at the system's Full Particle Birth Ratio.
Particle Birth Ramp Down	The time for the particle system to go from the Full Particle Birth Ratio to the Persistent Particle Birth Ratio.
Full Particle Birth Ratio	The amount of particles that spawn. A value of 1 will cause the maximum amount of particles to spawn.
Persistent Particle Birth Ratio	The amount of particles that during the persistent effect phase of the effect shader.
Particle Lifetime	How long a particle will exist in the world. Adjust the +/- value to provide variability to this value.
Initial Speed Along Normal	The initial speed assigned to a particle when it is spawned. The normal should be considered the mostly random direction that a particle is given when it is spawned. Thus, this value controls the explosiveness of the particle effect.
Acceleration Along Normal	The amount of acceleration (or deceleration if negative values are used) applied to a particle. The normal is on the shaded object (such as the player) and negative acceleration values will pull the particles towards the object.
Initial Velocity XYZ	The amount of velocity applied to a particle in world coordinates. To make particles drift upwards, apply a positive velocity to the Z axis.
Acceleration XYZ	The amount of acceleration applied to a particle in world coordinates. As an example, you can make a particle float back down after a time by making the absolute value of a negative Z acceleration greater than the initial velocity divided by the particle lifetime, or |-ZAcceleration| > ZVelocity / Particle Lifetime.
Initial Rotation	The initial rotation assigned to a particle when it is spawned.
Rotation Speed	How fast the particles will rotate after spawning.

The Time component in the following options is not specified in seconds, but rather a value in the 0 - 1 range. This decimal value represents the percentage of a particle's life.

Particle Shader Parameters: Continued

Scale Key 1	The first value represents the scale of a particle, the Time value determines when that scale is reached. All particles are spawned with a scale of 0 and increase in size until they reach this scale.
Scale Key 2	Second scale and time component of the particle.
Texture	Press the Edit button to determine what texture the particle will use. It will appear as a sprite.

Particle Shader Parameters: Color Keys

Color	The tint of the particle at that time
Color Alpha	The alpha amount of the particle
Color Key Time	The time that the color and alpha settings occur

Addon Models

These are Debris objects that are placed at an Actor's joints when the Effect Shader is applied. This is most clearly seen in the ice chunks that appear on an actor hit by the Ice Form shout.

File: The debris file used to pick .nif files from

Fade In Time: The length of time needed to fade in the debris models when applied.

Fade Out Time: The length of time needed to fade out the debris models when removed.

Scale Start: The starting scale of the debris models when they first appear.

Scale End: The ending scale of the debris models when they are fully attached.

Scale In Time: The time it takes for the debris models to scale in (from Start Scale to End Scale).

Scale Out Time: The time it takes for the debris models to scale out (from End Scale to Start Scale).

Notes

• Remember that your shaders are (generally) triggered by spells; those spells can have unintuitive effects on how the shader behaves, breaking the behavior of the various fade options. It's best to test your EffectShaders independently by using the PlayMagicShader and StopMagicShader console commands; both run on an actor and take the form ID of a shader.
  • In some particularly bizarre cases, magic effects that trigger on different conditions can break each other's shaders if they're part of the same spell; yet they and their shaders work perfectly fine if they're separated out into different spells.