Готовые примеры скриптов

Скрипт инстанциации

Пожалуйста, помните, что несколько примеров скриптов, будет завершены сами собой, необходимо подключить скрипт к объекту в Creation Kit, прежде чем он будет работать.Исключением является «библиотека» сценариев, таких как Utility Script, которые содержат определения глобальных функций для использования в других сценариях.

Property Setting

And if the script has any properties, those properties must be set on the object to which the script is attached in the Creation Kit before the script will work correctly.

Script Name

If you use any of these example scripts, you can change the name to anything else, but if you're creating the file outside of the Creation Kit you must make sure it also matches the name of your file.

Creating a Simple Toggle

ScriptName SimpleToggle Extends ObjectReference

Bool bToggle

Event OnActivate(ObjectReference akActionRef)
	bToggle = !bToggle ; Set Bool to whatever it's not
	If bToggle ; True
		; Do stuff
	Else ; False
		; Undo stuff
	Endif
EndEvent

To make this script work: Attach this script to an activator such as a button, lever, or container.

A Quest item you can drop and pick up again and set or reset objectives and Stages.

Scriptname DroppableQuestObject extends ObjectReference

Event OnContainerChanged(ObjectReference NewContainer, ObjectReference OldContainer)
	if FromQuest.GetStage() < StageToStopQuestItem ; Are we a quest item at the current stage?
		if OldContainer == Game.GetPlayer()
			FromQuest.SetObjectiveDisplayed(ObjectiveToDisplayOnDrop,True,True)
			FromQuest.SetObjectiveDisplayed(ObjectiveToHideOnDrop, False) ; Uncomplete the objective completed on pickup.
			if UncompleteEnable
				FromQuest.SetObjectiveCompleted(ObjectiveToCompleteOnPickup,False)
			endif
			if StageToSetOnDrop >= 0
				FromQuest.SetStage(StageToSetOnDrop)
			endif
		elseif NewContainer == Game.GetPlayer()
			FromQuest.SetObjectiveDisplayed(ObjectiveToDisplayOnPickup,True,True)
			FromQuest.SetObjectiveCompleted(ObjectiveToCompleteOnPickup)
			if StageToSetOnPickup >= 0
				FromQuest.SetStage(StageToSetOnPickup)
			endif
		endif
	else ; Nope, we're not a quest item at this stage.

	endif
EndEvent

Quest Property FromQuest  Auto  ; Set this to the quest the item is a quest item for.
Bool Property UncompleteEnable Auto ; If true, "uncomplete" the objective completed on pickup when dropped.
Int Property StageToStopQuestItem = 99999 Auto ; At this stage or later, it effectively ceases to be a quest item anymore.
Int Property StageToSetOnPickup = -1 Auto ; When item is picked up, set this stage in the quest (Defaults to No Stage)
Int Property ObjectiveToDisplayOnPickup Auto ; What objective should be displayed when item is picked up by the player?
Int Property ObjectiveToCompleteOnPickup Auto ; Usually the "Get this item" objective.
Int Property StageToSetOnDrop = -1 Auto  ; If player drops the item, what stage do we "go back" to?
Int Property ObjectiveToDisplayOnDrop  Auto  ; Re-display the objective to "get" the object.
Int Property ObjectiveToHideOnDrop  = -1 Auto ; Should be the same as ObjectiveToDisplayOnPickup, ideally.

To use this script: attach it to the item you want to use, and set the properties accordingly, assigning the quest, Objectives, and Stages involved. For example, let's say that in the quest "StarsAndGarters", the garter belt of Wootazootamootagoota The Tense is set in stage 10 as Objective 10, and Displays Objective 20 "Place the belt on the statue", and sets stage 20 when picked up, and you want to go back to stage 10 if the player drops it. And after stage 30 (Player has put the belt on the statue) it no longer matters what happens to it. You would set your properties as follows:

FromQuest: StarsAndGarters UncompleteEnable: True StageToStopQuestItem: 30 StageToSetOnPickup: 20 StageToSetOnDrop: 10 ObjectiveToDisplayOnPickup: 20 ObjectiveToCompleteOnPickup: 10 ObjectiveToDisplayOnDrop: 10 ObjectiveToHideOnDrop: 20

A Trigger That Detects When The Player Enters

Scriptname ExampleTrigger extends ObjectReference

Event OnTriggerEnter(ObjectReference akActionRef)
	if(akActionRef == Game.GetPlayer()) ; This condition ensures that only the player will trigger this code
		Debug.MessageBox("Yippee!")
	endif
EndEvent

To Make This Script Work

Select an existing object in your cell

Click on the Trigger Volume button, the box with a T inside of it.

A orange box should appear around the object you selected.

One reason the Creation Kit is more awesome than any prior editor I've used is this feature!

If you know you need a large trigger volume, select a large object before pressing the T-box button!

Now edit the new orange box you created and add the script above.

Then go in-game and walk into the space where this invisible box is.

Uses:

Create events that depend on player positioning

You could eliminate the player if statement above and have other actors like draugr or companions activate things as well

Non-player triggers can be used by changing the == to a != in the script above, to do things to other actors like restoring their health or moving them around (but not affecting player if player walks through the trigger)

Cycle Through a List of Objects and Perform an Action on Each Object(FormLists)

This example script cycles through a List of objects, known as a Formlist, and enables them all if they are disabled, and disables them if they are enabled, each time the player character walks through a chosen trigger volume. If you use a Formlist of special effects, this would cause all the many special effects you have in the formlist to disappear or reappear each time you walk through the trigger volume.

ScriptName RamaFormListExampleScript extends ObjectReference

Int iIndex
ObjectReference Reference
FormList Property ListOfObjectsFLST Auto ; see notes after script for more info on this property

Event OnTriggerEnter(ObjectReference akActionRef)
	If akActionRef == Game.GetPlayer()
		iIndex = ListOfObjectsFLST.GetSize() ; Indices are offset by 1 relative to size
		While(iIndex > 0)
			iIndex -= 1
			Reference = ListOfObjectsFLST.GetAt(iIndex) as ObjectReference ; Note that you must typecast the entry from the formlist using 'As'.
			If Reference.IsEnabled()
				Reference.Disable()
			Else ; If Reference.IsDisabled() 
				Reference.Enable()
			EndIf
		EndWhile
	EndIf
EndEvent

To Make This Script Work

This script runs on a OnTriggerEnter event, so you must create a trigger volume. See the script example above for details on this.
Remember to add this example script to the trigger volume object that you create, so you have an actual instance of this script in your level.
You must create a formlist of the objects you want to cycle through in this script example.

1. Go to the miscellaneous section of the Object Window and click on FormLists, 2. then right click to make a new FormList 3. In your cell view, hold shift and select all of the forms you want to add to the formlist, these could be actors or special effects, activators, or any other kind of form. Name all the forms you want to include from your cell in a similar way so they can be easily selected as a group using shift. 4. Drag the selected forms into the window containing your new formlist information. 5. Make sure to only add forms to your formlist that are all of the same type. Do not mix actors and activators for example.

Now you must modify the property of this script example instance, which is present on your trigger volume.

Edit the property so that it points to EditorID of your formlist that you just created.

For this script example, I was simply enabling or disabling the objects in the list, so make sure that your formlist contains forms that will react when you enable/disable them. Actors or special effects (look up FX in the *All section of the Object Window) are good forms to start with.

Uses:

Any time you have a long list of script properties you want to perform an action on, you can make a formlist instead, and use the while loop to make your coding life Heavenly.
Systematically add a certain amount of health or other characteristic to 10 or 2000 actors / creatures to make then stronger or weaker or give them a certain skill (use setAV actor function)
Use enable/disable to make a whole bunch of special effect objects (they start with FX in editor) appear or disappear

Enjoy!

Cycle Through a List of Objects and Perform an Action on Each Object(Linked Ref Chain)

This script will cycle through all the references in a linked ref chain and perform an action on each of them. In this example, the action would be to move each reference up by 16 units when you activate any one of them. Basically, it's the same thing as the FormList version, except you create a linked ref chain instead of a FormList.

Scriptname LinkRefChainExample extends ObjectReference

Event OnActivate(ObjectReference akActionRef)
	if (akActionRef == Game.GetPlayer())
		PerformActionOn(Self)
		ObjectReference TempRef = GetLinkedRef()
		while (TempRef && TempRef != Self)
			PerformActionOn(TempRef)
			TempRef = TempRef.GetLinkedRef()
		endwhile
	endif
EndEvent

Function PerformActionOn(ObjectReference Target)
	Target.MoveTo(Target, 0, 0, 16)
EndFunction

To Make This Script Work

This script runs off an OnActivate event, so you must be able to activate the object this script is attached to.
- You can change the OnActivate to whatever you wish to fire off the action.
You need to create a linked ref chain.
- If you don't know how to create a linked ref to another object, read this.
- A linked ref chain is basically an object that has a linked ref, which has its own linked ref, which also has its own linked ref, etc.
Remember to attach this script to the first object in the linked ref chain
- If your linked ref chain links back to itself, then you could put this script on each of the objects

Move an Object to a Specific Location Without Fade

You can use this script to make an activator or actor move without fading out in any way (moveTo and setPosition cause fading to occur). Use this to make objects fly around or make the player move continuously to a destination without fade.

This example moves the player, for your entertainment.

To move something other than player, add a property of type ObjectReference and set it to the actor or activator that you want to move (I have not succeeded in moving statics, only activators and actors)
Use different Events freely, this event is used for simplicity and easy demonstration.

ScriptName MoveObjExample extends ObjectReference  

ObjectReference property dest auto

Event OnTriggerEnter(ObjectReference akActionRef)
	if akActionRef == Game.GetPlayer()
		akActionRef.TranslateToRef(dest,500) ; 500 is the speed value, it's pretty fast
	endif
EndEvent

To Make This Script Work

Make an XMarkerHeading object (search *All with "xmarker" filter), place it where you want the player to be moved to.
Click on an object in your cell and select the Trigger Volume button, the T with a box around it
Move the orange box to where you want the player to start their controlled movement to the XMarkerHeading destination.
Add this script above to the orange box/trigger volume that you created.
SET THE PROPERTY of the script instance, dest, to be your XMarkerHeading that you just made.

This example will not work if you do not set the property as I mention just above, this is an easy thing to forget in this new and wonderful language. Get used to these basics and you will find Papyrus much more powerful than prior scripting languages.

A Fully Functional Dwemer Button

Scriptname DwemerButtonExampleScript extends ObjectReference  

ObjectReference property objSelf auto hidden
Sound property QSTAstrolabeButtonPressX auto

Event OnCellAttach() ; this event runs when cell is loaded containing this scripted object
	PlayAnimation("Open")
EndEvent

Event OnActivate(ObjectReference akActionRef)
	if akActionRef == Game.GetPlayer()
		PlayAnimationAndWait("Trigger01", "done") ;--- sound and animation
	        if (QSTAstrolabeButtonPressX)
		     QSTAstrolabeButtonPressX.Play(Self)
	        endif
	        Debug.MessageBox("Joy!") ;actual code for what button should do
	endif
EndEvent

To Make This Script Work

You must create this script on an Activator object, probably a dwemer button :)
You must then set the property for the QST sound effect property, the sound file has the same name as the property in the script above.

To make your own dwemer button and avoid messing with the original Skyrim scripts/activators:

Find a dwemer button in the object window and change the ID.
Create the changed button as a new form when prompted.
Edit the new button to remove the original script(s) and attach you own.

Set Quest Stage When Picked Up By Player

ScriptName SetStageOnPlayerPickUp extends ObjectReference

Quest property QuestToSet auto
int property StageToSet auto

Event OnContainerChanged(ObjectReference akNewContainer, ObjectReference akOldContainer)
	if akNewContainer == Game.GetPlayer()
		QuestToSet.SetStage(StageToSet)
		GoToState("Taken")
	endif
EndEvent

State Taken
	; Do nothing
EndState

Usage of Arrays to Make Scripts Compact

In this example you can see how to use a simple script property to reduce the number of scripts you need to write and thus the amount of properties you need to set, which can be time-consuming. Below I was having to do things to things to about 30 different draugrs:

turn their AI on and make them visible
turn their AI off and make them invisible

I have different conditions within my level for when each of these two actions should occur. I could divide this into two scripts, but instead I wrote one script and passed a property to the script with each instance of the script to determine which aspect of the script would run.

Actor[] Property DraugrArray Auto ; Contains 30 elements filled in CK with the 30 Draugr
Bool Property bEnableBeasts Auto ; Can be set from another script and/or initialized true or false

Event OnTriggerEnter(ObjectReference akActionRef)
	If akActionRef == Game.GetPlayer()
		Int iIndex = DraugrArray.Length ; Will return 30
		While iIndex > 0
			iIndex -= 1 ; 29'th element is 30'th Draugr
			Actor rDraugr = DraugrArray[iIndex]
			rDraugr.EnableAI(bEnableBeasts)
			rDraugr.SetAlpha(bEnableBeasts As Float)
		EndWhile
	EndIf
EndEvent

Note that bEnableBeasts is a property so one can decide with each instance which way the script should work. One could use a FormList rather than an array or simply set one Draurg as the enable parent of the other 29 and enable/disable him, thus all the children refs simultaneously.

How to Make This Script Work

You will need to fill the array elements in the Creation Kit with the chosen creatures.
Then you will need to chose for each instance of the script whether the boolean property should be false or true, this setting process shows up a simple checkmark box in the editor.

A helper script with functions to get the current moonphase, sync between the two moons and day of the week

Scriptname ExtendedUtility

Import Utility
Import Math

;/++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+	GetPassedGameDays() returns the number of fully passed ingame days
+	as int.
+
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++/;

Int Function GetPassedGameDays() Global
	Float GameTime
	Float GameDaysPassed
	
	GameTime = GetCurrentGameTime()
	GameDaysPassed = Floor(GameTime)
	return GameDaysPassed as Int
EndFunction

;/++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+	GetPassedGameHours() returns the number of passed ingame hours of
+	the current day as int.
+
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++/;

Int Function GetPassedGameHours() Global
	Float GameTime
	Float GameHoursPassed
	
	GameTime = GetCurrentGameTime()
	GameHoursPassed = Floor((GameTime - Floor(GameTime)) * 24)
	return GameHoursPassed as Int
EndFunction

;/++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+	GetCurrentMoonPhase() returns an integer representing the current
+	phase of the moons Masser and Secunda based on "SkyrimClimate".
+	Between 12:00 AM and 11:59 AM the phase during the night from last
+	day to this day is returned. Between 12:00 PM and 11:59 PM the
+	phase for the night from this day to next day is returned. Thus
+	a call to the function at night (between 8:00 PM and 6:00 AM) all-
+	ways returns the currently visible phase.
+
+	The returncodes are as follows:
+		0 - Full Moon
+		1 - Decreasing Moon 3/4
+		2 - Decreasing Moon 1/2
+		3 - Decreasing Moon 1/4
+		4 - New Moon
+		5 - Increasing Moon 1/4
+		6 - Increasing Moon 1/2
+		7 - Increasing Moon 3/4
+
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++/;

Int Function GetCurrentMoonphase() Global
	Int GameDaysPassed
	Int GameHoursPassed
	Int PhaseTest
	GameDaysPassed = GetPassedGameDays()
	GameHoursPassed = GetPassedGameHours()
	
	If (GameHoursPassed >= 12.0)
		GameDaysPassed += 1
	EndIf
	
	PhaseTest = GameDaysPassed % 24 ;A full cycle through the moon phases lasts 24 days
	If (PhaseTest >= 1 && PhaseTest <= 3)
		return 0
	ElseIf (PhaseTest >= 4 && PhaseTest <= 6)
		return 1
	ElseIf (PhaseTest >= 7 && PhaseTest <= 9)
		return 2
	ElseIF (PhaseTest >= 10 && PhaseTest <= 12)
		return 3
	ElseIf (PhaseTest >= 13 && PhaseTest <= 15)
		return 4
	ElseIf (PhaseTest >= 16 && PhaseTest <= 18)
		return 5
	ElseIf (PhaseTest >= 19 && PhaseTest <= 21)
		return 6
	ElseIf (PhaseTest >= 22 || PhaseTest == 0)
		return 7
	EndIf
	
EndFunction

;/++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+	GetCurrentMoonSync() returns an integer that resembles where we are
+	in the 5 day cycle of the Snychronisation between the moons.
+
+   Returncodes:
+		0 - Moons appear at the same time
+		1 - not yet determined how far ahead/behind Secunda is
+		2 - not yet determined how far ahead/behind Secunda is
+		3 - not yet determined how far ahead/behind Secunda is
+		4 - not yet determined how far ahead/behind Secunda is
+
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++/;

Int Function GetCurrentMoonSync() Global
	Int GameDaysPassed
	Int GameHoursPassed
	Int SyncTest
	
	GameDaysPassed = GetPassedGameDays()
	GameHoursPassed = GetPassedGameHours()
	If (GameHoursPassed >= 12)
		GameDaysPassed += 1
	EndIf
	SyncTest = GameDaysPassed % 5
	return SyncTest
EndFunction

;/++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+	GetDayOfWeek() returns the current ingame day of the week as int.
+	
+	Returncodes:
+		0 - Sundas
+		1 - Morndas
+		2 - Tirdas
+		3 - Middas
+		4 - Turdas
+		5 - Fredas
+		6 - Loredas
+
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++/;

Int Function GetDayOfWeek()
	Int GameDaysPassed
	
	GameDaysPassed = GetPassedGameDays()
	return GameDaysPassed % 7
EndFunction

How to make this script work

Put it to your "Data/Scripts/Source" Folder and compile.
Call it's functions in other scripts either by import and call by function name or by using ExtendedUtility.<FunctionName>()

Script to make an item cast a spell

Scriptname SpellZapScript extends ObjectReference  

import Utility
Float Property xOffset Auto ; Relative X position for the target
Float Property yOffset Auto ; Y Offset for Target
Float Property zOffset Auto ; Z offset for Target
Float Property RandomOffsetX Auto ; Randomness applied to X Offset. Initializes at 0.
Float Property RandomOffsetY Auto ;Randomness applied to Y Offset. Initializes at 0.
Float Property RandomOffsetZ Auto ; Randomness applied to Z Offset. Initializes at 0.
Float Property PulseRate = 1.0 Auto ; How often do we shoot?
Float Property RandomRate Auto ; Add random delay to pulse rate, capped at this value
Activator Property TargetType Auto ; What type of object are we zapping if we're spawning a node?
ObjectReference Property CurrentTarget Auto ; The actual target we're shooting at
Bool Property SpawnNode Auto ; Do we spawn a target? If not, zap the nearest valid target. Initializes 'False'
Spell Property Zap Auto ; What spell shall we use for the effect?
FormList Property TargetTypeList Auto ; List of potential targets
Float Property SeekRange = 1000.0 Auto ; The range it will "Lock into" a target if not making a node.

Event OnInit()
    if CurrentTarget ;!= None
    elseIf SpawnNode
        float newXOffset = XOffSet + RandomFloat(-RandomOffsetX, RandomOffsetX)
        float newYOffset = YOffSet + RandomFloat(-RandomOffsetY, RandomOffsetY)
        float newZOffset = ZOffSet + RandomFloat(-RandomOffsetZ, RandomOffsetZ)
        CurrentTarget = PlaceAtme(TargetType)
        CurrentTarget.MoveTo(Self, newXOffSet, newYOffSet, newZOffSet)
    endif
    RegisterForSingleUpdate(PulseRate)
EndEvent

Event OnUpdate()
    ; find something nearby to shoot at if we're not making our own target.
    if !SpawnNode && !TargetTypeList && GetDistance(Game.GetPlayer()) < SeekRange ; No list given, Default to the player if he is in range.
	CurrentTarget = Game.GetPlayer()
    elseif TargetTypeList
        CurrentTarget = Game.FindClosestReferenceOfAnyTypeInListfromRef(TargetTypeList,Self,SeekRange)
    endif
    if CurrentTarget ; it's possible that there is no target 
        Zap.Cast(Self,CurrentTarget)
    endif
    RegisterForSingleUpdate(PulseRate + RandomFloat(0.0, RandomRate))
EndEvent

How to make this script work:

Put it on the object you want the spells to originate from, and set the properties to define its exact desired behavior.

Pick any spell you want for the property Zap (needs to be of the Aimed spell type)

If you want it to just shoot at a specific spot, define the Spawn Node Type as an xmarker, set SpawnNode to "True", and enter the relative coordinates you want the spell to be aimed at.

If you want it to look for targets nearby, set SpawnNode to false and put a formlist of the valid targets in the TargetTypeList. If no Formlist is given, it will default to trying to shoot the player.

Script for a quest with time limit

Scriptname LH_TimeLimitedQuest extends Quest  

GlobalVariable Property GlobalDays auto ;initial days to complete
GlobalVariable Property GlobalTime auto ;counter for hours left
Quest Property TimedQuest auto ;the quest (I used two scripts on same quest while cause I modified a vanilla one)
int Property FailObjective auto ;objective that will fail when hours left reaches 0, it is the one to display the time left and will be refreshed
int Property FailStage auto ;stage to set the quest to, fail whole quest from it's fragment or whatever

Float endTime

Event OnInit()
	if (TGRDays.GetValue()>0)
		;Debug.Notification("Starting countdown")
		GlobalTime.SetValue(GlobalDays.GetValue()*24)
		endTime = Utility.GetCurrentGameTime()+GlobalDays.GetValue()
		TimedQuest.UpdateCurrentInstanceGlobal(GlobalTime)
		RegisterForUpdateGameTime(0.10)
	EndIf
EndEvent

Event OnUpdateGameTime()
	if (!TimedQuest.IsRunning())
		UnregisterForUpdateGameTime()
	EndIf
	float step = Math.Ceiling((endTime - Utility.GetCurrentGameTime())*24) - GlobalTime.GetValue()
	if (step != 0)
		if (0-step > GlobalTime.GetValue()) ;avoid displaying less then 0
			step = 0 - GlobalTime.GetValue()
		EndIf
		if TimedQuest.ModObjectiveGlobal(step, GlobalTime, FailObjective, 0, false, false)
			GlobalTime.SetValue(0)
			TimedQuest.UpdateCurrentInstanceGlobal(GlobalTime)
			TimedQuest.SetStage(FailStage)
			UnregisterForUpdateGameTime()
		EndIf
	EndIf
EndEvent

Making a Cool Cut-Scene

ScriptName Cutscene Extends ObjectReference

Actor Property PlayerREF Auto
ObjectReference Property Point1 Auto
ObjectReference Property Point2 Auto
ObjectReference Property Point3 Auto

Event OnTriggerEnter(ObjectReference akActionRef)
	If akActionRef == PlayerREF ; Limit this trigger to the player only.
		PlayerREF.SetAlpha(0)
		PlayerREF.SetGhost(True)
		Game.DisablePlayerControls(True, True, True, False, True, False, True) ; Disable all controls except looking.
		Utility.Wait(0.1) ; Give the script time...
		PlayerREF.TranslateToRef(Point1, 100)
		Utility.Wait(5.0) ; After 5 seconds, proceed to next point.
		PlayerREF.TranslateToRef(Point2, 50)
		Utility.Wait(10.0) ; After 10 seconds, go to next area
		PlayerREF.TranslateToRef(Point3, 200)
		Utility.Wait(20.0) ; Watch the final scene, and then...
		PlayerREF.SetAlpha(1)
		PlayerREF.SetGhost(False)
		Game.EnablePlayerControls()
	EndIf
EndEvent

How to use this script: Make a new trigger box, and then add this script to it. Make 3 XMarkers, and define them in the Properties Window. Enter your new trigger, and see your cool cut-scene!

Script a container that only accepts certain types of items

How to use this script: Fill the FormList, AcceptedItemFLST, with only the item(s) you want the container to accept.

ScriptName ExampleContainerScript extends ObjectReference

FormList Property AcceptedItemFLST Auto

Event OnItemAdded(Form akBaseItem, int aiItemCount, ObjectReference akItemReference, ObjectReference akSourceContainer)
	If akSourceContainer == Game.GetPlayer()
		If !AcceptedItemFLST.HasForm(akBaseItem)
			RemoveItem(akBaseItem, aiItemCount, True, akSourceContainer)
			Debug.Trace("Invalid Item")
		EndIf
	Endif
EndEvent

Maintenance/update code which runs once per save load and shows a message when a mod is updated or first loaded

Requires Skyrim v1.6+: All event based, so no polling is necessary. For this method to work, two scripts are needed as OnPlayerLoadGame will not fire from a Quest script.

ScriptName YourQuestScript extends Quest

Float fVersion

Event OnInit()
	Maintenance() ; OnPlayerLoadGame will not fire the first time
EndEvent

Function Maintenance()
	If fVersion < 1.01 ; <--- Edit this value when updating
		fVersion = 1.01 ; and this
		Debug.Notification("Now running YourModName version: " + fVersion)
		; Update Code
	EndIf
	; Other maintenance code that only needs to run once per save load
EndFunction
;******************************************************
ScriptName YourPlayerAliasScript extends ReferenceAlias

YourQuestScript Property QuestScript Auto

Event OnPlayerLoadGame()
	QuestScript.Maintenance()
EndEvent

Does not require Skyrim v1.6+: Has to poll, but will work reliably and can be fit in with existing, reiterating code.

ScriptName YourQuestScript extends Quest

Float fVersion
Actor Property ActorFromYourMod Auto

Event OnInit()
	RegisterForUpdate(10)
EndEvent

Event OnUpdate()
	If bGetGameLoaded(ActorFromYourMod, "BrainCondition")
		If fVersion < 1.01
			fVersion = 1.01
			Debug.Notification("Now running YourModName version: " + fVersion)
			; Update Code
		EndIf
		; Maintenance code
	Else
		; Other, reiterating code if needed
	EndIf
EndEvent

Bool Function bGetGameLoaded(Actor akActor, String asActorValue = "")
	If akActor.GetActorValue(asActorValue)
		akActor.SetActorValue(asActorValue, 0)
		Return True ; Will have reverted to 100 upon save load since BrainCondition is obsolete and not stored in saves
	Else
		Return False
	EndIf
EndFunction

Summon Spell

The below will summon YourSummonREF from wherever they are to the player. In this example, it's dealt with by a spell, but the function could be placed and/or called elsweyr. If as a spell, be sure to set the cooldown time to about 3.0 seconds so the caster can't cast it again until it's worked itself out.

ScriptName RepeatableSummonEffectScript extends ActiveMagicEffect

Actor Property YourSummonREF Auto ; An ObjectReference will also work with the summon function

Event OnEffectStart(Actor akTarget, Actor akCaster)
        Summon(akCaster, YourSummonREF)
EndEvent

Function Summon(ObjectReference akSummoner = None, ObjectReference akSummon = None, Float afDistance = 150.0, Float afZOffset = 0.0, ObjectReference arPortal = None, Int aiStage = 0)
        While aiStage < 6
                aiStage += 1
                If aiStage == 1 ; Shroud summon with portal
                        arPortal = akSummon.PlaceAtMe(Game.GetForm(0x0007CD55)) ; SummonTargetFXActivator disables and deletes itself
                ElseIf aiStage == 2 ; Disable Summon
                        akSummon.Disable()
                ElseIf aiStage == 3 ; Move portal in front of summoner
                        arPortal.MoveTo(akSummoner, Math.Sin(akSummoner.GetAngleZ()) * afDistance, Math.Cos(akSummoner.GetAngleZ()) * afDistance, afZOffset)
                ElseIf aiStage == 4 ; Move summon to portal
                        akSummon.MoveTo(arPortal)
                ElseIf aiStage == 5 ; Enable summon as the portal dissipates
                        akSummon.Enable()
                EndIf
                Utility.Wait(0.6)
        EndWhile
EndFunction

Show Gift Inventory and Identify Items Given

This is used for the Player to feed his animal companion. The FormList is created in the CK and includes all the food (Potion & Ingredient) items I want to consider food for the animal.

FormList Property FoodList Auto
Bool hasBeenFedToday = False

Function FeedCompanion()
	AddInventoryEventFilter(FoodList)
	ShowGiftMenu(True, FoodList, False, False)
	RemoveAllInventoryEventFilters()
EndFunction

Event OnItemAdded(Form akBaseItem, int aiItemCount, ObjectReference akItemReference, ObjectReference akSourceContainer)
	If akSourceContainer == Game.GetPlayer()
		RemoveItem(akBaseItem,aiItemCount)
		If !hasBeenFedToday
			hasBeenFedToday = True
		EndIf
	EndIf
EndEvent

Complete Example Scripts/ru

Contents

Готовые примеры скриптов

Скрипт инстанциации

Property Setting

Script Name

Creating a Simple Toggle

A Quest item you can drop and pick up again and set or reset objectives and Stages.

A Trigger That Detects When The Player Enters

Cycle Through a List of Objects and Perform an Action on Each Object(FormLists)

Cycle Through a List of Objects and Perform an Action on Each Object(Linked Ref Chain)

Move an Object to a Specific Location Without Fade

A Fully Functional Dwemer Button

Set Quest Stage When Picked Up By Player

Usage of Arrays to Make Scripts Compact

A helper script with functions to get the current moonphase, sync between the two moons and day of the week

Script to make an item cast a spell

Script for a quest with time limit

Making a Cool Cut-Scene

Script a container that only accepts certain types of items

Maintenance/update code which runs once per save load and shows a message when a mod is updated or first loaded

Summon Spell

Show Gift Inventory and Identify Items Given

Navigation menu

Search