Differences from Previous Scripting

From the CreationKit Wiki
Jump to navigation Jump to search

What's New?[edit | edit source]

Papyrus, the new scripting language, is in many ways similar to the old scripting language used in Bethesda Game Studios' games. However, due to the introduction of added functionality and flexibility, there are many significant changes to syntax, workflow, and occasionally functionality. This page is for people are already familiar with the concepts of a scripting language, and know a little bit about what Papyrus is. If you haven't already, please be sure to first read the Papyrus Introduction.

For a technical, detailed explanation of the new scripting language, please refer to the Papyrus Language Reference category.

New Concepts[edit | edit source]

The new scripting language allows you to do a lot more. This means that the amount of things that you will have to know regarding the new scripting system will increase. On the plus side, certain additions to the scripting language make things much faster and easier to do. Among these new additions, the ability to make your own functions, and the ability to use timers, looping logic and states should make your life easier. I've personally found that it's much easier to think in a more straightforward manner when scripting. There's much less jumping back and forth between GameMode and other events. I find that I have to keep track of much fewer tracking and enable/disable variables as well.

Replacing GameMode[edit | edit source]

Timers[edit | edit source]

In the old system, running an event meant that you would run through all of the script in that event immediately and in sequence. If you didn't want part of the script to run, you would have to use an IF statement to conditionalize out part of the script. If you wanted part of the script to run at a later time, you would have to "turn on" a timer in the GameMode block by setting a condition and then running getSecondsPassed until you could run another section of the gameMode block.

In the new system, you can use Latent Functions (such as the Wait() function) in order to temporarily pause the script. Once the pause is over (it is usually defined by you somehow) then the script will pick up running again right where it left off.

Some Latent Functions:

;waits for 5.1 seconds
Wait( 5.1 )

;This plays an animation, and then waits for an animation event to occur
;This animation event is set up by the artist in Havok Behavior.
PlayAnimationAndWait( "AnimationName", "EventName" )

Please note that you must import the Utility library using

import utility

at top of your script if you just want to type Wait()

Alternatively you can type


without importing anything.

  • Note: you can also import Game and Debug so you can just type getplayer() and messageBox("happy msg") for example, instead of game.getPlayer() and debug.messageBox

Looping[edit | edit source]

In the old system, you could loop by setting up a series of IF statements and have them increment a counter until a certain condition (usually using that counter) was no longer true.

In the new system, you can use looping statements (currently While is implemented) inside any events you want. As long as the expression following While is true, the loop will continue running.

While counter <= 100    ;do something 100 times.
     counter += 1        ;Shorthand for "counter = counter + 1"

OnUpdate[edit | edit source]

OnUpdate is an event that is sent to your form if, and only if, you request it. It is sent at regular intervals that you define (similar to how the game mode blocks on quests would work with the delay option). Note that every script attached to the form will receive update events so, for example, if your quest stage fragment registers for update, your quest script will also receive the update events. To have your form start receiving update events, you must register for them:

RegisterForUpdate(10.0) ;request update events every ten seconds

Once you no longer want updates, you may then unregister:


If you want to change how often you are sent events, simply re-register with the new delay.

Please make sure you read the notes on the OnUpdate page as there are some caveats that scripters should be aware of.

One Script Running Multiple Instances of the Same Event[edit | edit source]

Events, like OnActivate, used to run in a single frame. With the addition of multithreading, looping, and latent functions like Wait(), running a single event may take a long time. That may bring you to ask "What happens if I cause an OnTriggerEnter event before the previous OnTriggerEnter event is finished?" It turns out that one single script is capable of running multiple instances of a single event. To prevent this, you can use States or control variables to disable or change what happens if an event is called before another instance of the same event is called before the first one is finished.

Keywords[edit | edit source]

There are a few keywords in the new scripting language that are useful for one reason or another.

  • None - this indicates that a reference is essentially empty.
refVariable01 = GetLinkedRef()
if refVariable01 != None
    ;do something with refVariable01 because GetLinkedRef() returned something
  • Self - variable, which refers to the current instance of the script. It's similar to the getSelf function from the old scripting language, but it gives the script instance instead of the reference running the script.
  • Parent - special keyword that you use when calling a function to ensure that you call the function on the script you extend (your parent), and not the function you have in your local script.
  • Hidden - hides a script or property from the editor.
  • Conditional - flags a script or a variable as visible to the condition system. Note that the script must be flagged as conditional for any of the variables in it to be visible, and you may only have one conditional script attached to a single object at a time.
  • True - Used for Booleans instead of 1
  • False - Used for Booleans instead of 0

Misc Stuff[edit | edit source]

  • Script variables can be initialized to a specific value when they are defined using "= <value>" syntax.


int myVar = 20
  • Function variables can be initialied with full math expressions, instead of just simple values.
  • Scripts are types - as in, if you want to call a special script function, or access a property on that script, you must first cast the object you have to the script you expect to have.
  • Casting between types uses "<genericType> as <specificType>" syntax. If you try to cast a variable into something it isn't, you will get the "None" value.


Function DoFunnyDance(Actor target)
  FunnyDanceScript targetScript = target as FunnyDanceScript
  if targetScript != None
    targetScript.doingFunnyDance = 1
    Print("Cannot do funny dance, because the actor doesn't have the right script")
  • Anything can be cast to or treated as a boolean.
    • Int and float: non-zero values are true, zero is false.
    • Strings: non-empty strings are true, empty strings are false.
    • Objects: non-none objects are true, none objects are false.
    • Arrays: non-none arrays or arrays with 1 or more elements are true (even if the elements are false). None arrays or arrays with 0 elements are false.
  • Anything can be cast to a string. Numbers will be converted to a string representation, booleans will be simple "true" or "false" text, and objects will be converted to a readable format detailing the script name and the actual in-game object it is attached to.
  • Strings can be cast to numbers if the string actually represents a number.
  • If the compiler can automatically cast for you with no chance of error, it will do so. The following casts are done automatically:
    • Int -> Float
    • Anything -> String
    • Anything -> Bool
    • Object -> Parent Object
  • An object can only be cast as a Child Object if it actually is a Child object. In other words, any form cast this way needs to have a script attached using the form editor.
  • You can use the "+" operator to concatinate ("paste together") strings.


string Hello = "Hello"
string World = "World"
Trace(Hello + " " + World) ;prints "Hello World" to the log
  • The "!" operator has been added, and stands for "not". The expression "!value" is true if, and only if, value is false.
  • Hexadecimal numbers are prefixed with "0x" - most commonly these are Form IDs. For example, if you want form ID 00012EC7, you use 0x00012EC7 (the leading zeroes are not required)
  • Operators like "+=" and "-=" have been added. They work as follows:
myNumber += 1
myFloat -= 2 + 4 * player.getAV("repair")

Is equivalent to:

myNumber = myNumber + 1
myFloat = myFloat - (2 + 4 * player.getAV("repair"))

All math operators have equivalent versions: +=, -=, *=, /=, and %=

Syntax Changes[edit | edit source]

Functions now take parameters from within parentheses.[edit | edit source]

PlayGroup Forward 1

now becomes


This change to syntax should help things to be a little more explicit. Also, this should help things to be less confusing when using user-defined functions.

Assignment Syntax[edit | edit source]

set variable01 to 25

now becomes

variable01 = 25

This new syntax is a more standardized way of doing things.

Event Declaration Syntax[edit | edit source]

Begin OnTriggerEnter Player

now becomes

Event OnTriggerEnter( Actor akTriggerer )

Again, this is a more explicit way of doing things. "Event" makes it much more clear that you are starting an event, and "EndEvent" makes it more clear that you're ending an event. Events are essentially the same things as user-defined functions, except that something that happens in the game can trigger that event to occur.

Object References require Properties[edit | edit source]

BrotherVerulusRef.GetActorValue Health

now becomes

Actor Property akBrotherVerulus Auto

Where akBrotherVerulus is set through the Property Manager within the CK. See below for more on properties.

Functionality Changes[edit | edit source]

Performance[edit | edit source]

There are a few things to keep in mind when keeping things like performance in mind. With the old scripting language, writing inefficient script would eventually bog down the framerate of the game. In the new language, each script gets an allotted amount of processing time. After it uses up that processing time, the script will pause until it's allowed to have more processing time. This processing time is measured by function calls and logic done by the scripting language. You're much more likely to bog down all the scripts in the game then the game's actual framerate with a poorly-written script.

Timing[edit | edit source]

With the new language being fully multithreaded, timing is not quite as reliable as it was with the previous system. Previously, a script could say "I want to do this immediately," and the governing system would have no choice but to agree. A script in the new language can say "I want to do this immediately," and the script manager will essentially tell the script to take a ticket and wait in line. Telling a script to wait for 0.5 seconds really means that the script will wait for 0.5 seconds plus the time it takes for the script to get its number called. This amount of time is usually quite small, but it could have an impact on scripts where timing needs to be very precise.

Setup[edit | edit source]

Hooking Stuff Up in the Editor[edit | edit source]

Currently, scripts can be added to references, quests, activators, and other types in the editor. Open up the edit window, and find either a "scripts" tab, or a script list on the main dialog. Then click the "Add Script" button to pick from a lists of scripts to add to the object. You can doubleclick on the the script once it has been added (or click on the Properties button) to open the Properties window. Properties are essentially variables that can be set in the editor per instance of the script on the reference.

Multiple scripts can be added to the same object.

If you add a script to a base object, all references of the object will also gain those scripts, and the properties you set on those scripts on the base object. However you can easily override those settings just on that particular reference if you want that one to behave slightly differently then the others.

Properties[edit | edit source]

Before getting directly into properties, it should be noted that in the new scripting language, variables declared in a script are considered private. This means that if you're not inside the script, you can't set those variables or even see what values they have.

Properties are much like variables except they can be accessed from outside of the script, and can even be accessed and set in the editor per each reference. Pretty neat, if you ask me.

int property NumShots auto

This is an example of how to declare a property in script. NumShots is the property name, it is an integer, and the "auto" modifier is simply a quick way of defining a property. "Auto" will let you see and change the value from outside of the script, and you can set it from inside of the editor by going to the Reference Window-> Scripts Tab-> Script Name-> Properties, and you'll see the property and be able to put any int you want in there. You can also bring up this Property Manager window by double-clicking on any script attached to an object, or by right-clicking it and choosing Edit Properties.

If you have an object-type Property, and you name it the same as a particular object within the CK, the CK will automatically fill it in for you when you attach the script to an object. If you add the object later, you can always have the CK fill it in for you by clicking the Auto-Fill button in the Property Manager.

There's a longer way to declare properties as well, and this can come in handy if you want to do specific things, such as let other scripts see the property but not set it, or set some bounds on valid input, or even call some piece of script when a value gets read or written.

int shotCount = 20    ;This is an internal variable, can't be seen from outside, but you can set defaults this way.
int Property NumShots    ;This is what's seen externally
  int Function get()
    return shotCount 
  Function set(int value)
    if (value > 50) ;value is too big, so clamp it at 50 and write a warning to debug
      debug.trace ( "Tried to set NumShots to a number over 50. Clamping to 50" )
      shotCount = 50
    elseIf (value < 1) ;value can't be less than one or there would be nothing to shoot.
      debug.trace ( "Can't set value to less than one. Not going to change the value." )
    else             ;everything's ok, just set value to the number of shots
      shotCount = value